Reliability & Safety-ShineMate Global

High Quality Motor

Motor is the heart of power tools, ShineMate power tools use long-life high-quality motors to provide higher electrical strength and more stable mechanical performance.

High quality commutator

With high silver content, it can pass a larger current. Lower temperature and better structure stability under the same current, and it is more wear-resistant.

Overcurrent performance improved by

1.5 times

Double layer composite enameled wire

Using double-layer composite high-strength thick paint film, with good insulation, and strong overload capacity, withstand greater current and harsher environment, suitable for continuous working.

200℃ high temperature resistance

V-0 Flame Retardant Materials

Lithium battery packs and chargers use V-0 high-grade flame-retardant materials, which have good heat and fire resistance.

Multiple Safety Tests

Mechanical Safety Test

ShineMate has completed the mechanical safety test at the stage of product structure design, including drop test and impact resistance test.

Drop Test

Fall to the concrete surface from the calibration height of 1 meter and the three most unfavorable angles are carried out to achieve the calibrated result (the machine is not damaged).

Reinforced Commutator

The tool is rigidly supported, and three impacts with calibration energies (1.0±0.05 joules) are applied to each possible weak point of the shell, machine’s not damaged.

Product Durability Test

The ultimate life test of the product is carried out by means of rack test and manual operation to ensure that the products in the market have a long service life and meet the needs of professional users.

Machine Life

500-1,500h(Varies depending on the model)

500-1500 h

Switch Life Test

The service life is up to 100,000 times, stable quality, and a very low damage rate.

100000 times

Cable Bending Test

Use 6.8-7.2mm thick cable, while the normal thickness is 6-6.2mm; the bending times can reach 20,000 times, strong and bending-resistant.

20000 times

Electrical Safety Test

Double insulation structure, meets the performance requirements, safe and reliable.

4KV High Voltage Test

Passed the 4KV high voltage test, exceeding the general limit of 3750V.

Durability Test of Electrical Components

Cables and switches meet certification standards.

Anti-electromagnetic Interference EMC Test

Each model has passed the electromagnetic radiation, conduction and other test standards to ensure that the electromagnetic radiation of the product meets the national safety standard and will not cause harm to the human body.

Product, Production Management Certificates

ShineMate products are sold in 80+ countries and regions around the world. The products conform to the market standards of relevant countries and regions, including but not limited to CE, SAA, ETL, KR, PSE, CCC, CQC, etc. The production management system has passed the ISO9001: 2000 quality system standard.

Safe and environment-friendly

The materials used in the machines meet the environmental protection requirements of ROHS, REACH, and PAHS, and meet the EU import standards.

1.The flame retardant index refers to the property of the substance or the treated material that obviously delays the spread of flames, and is classified according to the grading system, V-0>V-1>V-2>HB.

2. ROHS refers to the "Restriction of Hazardous Substances" formulated by EU legislation.

3. REACH refers to "REGULATION concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals, " a chemical regulatory system established by the European Union.

4. PAHS refers to the detection of polycyclic aromatic hydrocarbons. Polycyclic aromatic hydrocarbons (PAHs) refer to class Ⅰorganic compounds with two or more benzenes, including more than 150 compounds such as naphthalene, anthracene, phenanthrene, and pyrene.